How To Store An ATV

Table of Contents

ATVs are a lot of fun, but they can be a pain to store. If you don’t have the right space or equipment, your ATV can end up taking over your garage or yard. Here are some tips on how to store an ATV so that it’s out of the way and ready for action when you need it.

1. If you have an ATV, you probably want to keep it in good condition so that it lasts for a long time.

2. There are a few things you can do to store your ATV properly and keep it from getting damaged.

3. First, make sure that you clean it thoroughly before putting it away for storage. This will remove any dirt or debris that could cause damage while the ATV is in storage.

4. Next, check all of the fluids and make sure they are at the proper levels. This includes oil, coolant, and gas.

5. You should also inflate the tires to the proper pressure before storing the ATV. This will help prevent flat spots from forming on the tires while they are not being used.

6. Finally, cover the ATV with a tarp or other type of cover to protect it from dust and other environmental hazards while it is in storage.”

If you’re not using your ATV, make sure to clean it before storing it away.

It’s important to give your ATV some TLC even when it’s not in use. Regular deep cleaning will protect your machine and keep it in good condition while it is stored away.

Removing mud and other dirt and debris with a pressure washer or hose is the first step, but you should also take care to properly lubricate your parts and apply any necessary treatments or paints to maintain their integrity. Not only will this extend the life of your ATV, but you’ll be thankful for taking this extra precaution when you finally do get the urge to ride again.

Find a storage location that’s out of the way and won’t be in the way of any foot traffic.

When looking for the perfect storage place, it is important to make sure you find one that is tucked away and won’t be in the line of foot traffic.

Sure, you may think a corner of the room or under the stairs sounds like a great idea, but it might not be if there are a lot of people passing by. So why not check out somewhere like the back of a closet, an att, ic, or even your basement?

All three offer plenty of space, and out-of-sight storage areas with minimal foot traffic. Plus they are all relatively easy to access! Just be sure to go through any items once in a while and rotate as needed – before you know it you’ll have an efficient and organized system!

Cover your ATV with a tarp or some other type of cover to keep it protected from the elements.

Protecting your ATV from the elements is a must if you want to keep it in good condition. Investing in quality covers like tarps and more can be a great way to ensure your machine receives the care it deserves.

Not only will they keep it safe from rain, snow, and other debris while sitting out in storage, but they’ll also act as shelters against UV rays and pests. Plus, it’ll add an extra layer of security against theft and vandalism too – always a nice bonus!

Be sure to check out the features that each cover offers before purchasing so you can get long-term protection for your ATV.

If possible, raise your ATV off the ground so that moisture doesn’t build up underneath it.

To keep your ATV running smoothly, it’s a good idea to raise it off the ground whenever possible. This will reduce moisture buildup under and around the machine, helping to protect its electrical components.

One easy way to do this is with some sturdy support blocks, which can safely lift the ATV and give it some breathing room. On top of better circulation and reducing the chances of rust or corrosion, raising your ATV could even help extend its lifespan; less strain from being unevenly weighted can mean fewer repairs in the long run.

Check on your ATV periodically to make sure that everything is still in good condition.

It’s important to check your ATV from time to time – especially if you use it regularly. While you don’t need to take the entire thing apart and inspect each part, a quick sweep of the key components can help you stay ahead of any potential issues.

Take a look at the brakes, tires, fluids, and other safety items like headlights and reflectors regularly so you won’t be caught off guard when it’s time for more serious maintenance down the line.

It may not seem like much, but providing a routine inspection of your ATV will go a long way to making sure it continues running in tip-top shape.

Final Words

As you can see, storing your ATV correctly is important for preserving its value and condition. Taking the time to properly clean and lubricate the vehicle before storage and periodically checking on it during periods of extended storage will ensure your

ATV remains in top condition. Investing in a good cover and keeping it clean is also key for keeping your ATV ready for riding as soon as you’re ready! With these helpful tips, you can have peace of mind knowing that your ATV has been prepared correctly so you can enjoy it whenever you need it most! Have fun, be safe, and have happy riding!

More Of The Same Category​

John Lawrence

John Lawrence

Hello, my name is John Lawrence, and I’m an adrenaline junkie.
My whole life, I’ve been drawn to activities that get my heart racing, from Bungie jumping to parachuting, motorcycles, and even water skiing, and there’s nothing that does that quite like ATVing.

About Me

ATVs are a lifestyle – I’m sure you know.
Lucky for me, my son (who got the bug from me LOL) just got a job with an ATV dealer, so I can get the insider’s secrets – but I’ll share it with you!

Recent Posts

Go offroad style